Quality Manager/Quality Engineer Electrical   Duration: 01/05/2026 – 30/04/2027 Location: Swindon, London (depending on the project) Type: Outside IR35   Your tasks as Quality Manager - Define and implement complex concepts, processes and methods for quality planning, assurance and control in line with the companies Quality Management Framework • Define and implement the project quality strategy under a risk-based approach, including planning and monitoring of quality resources and budgets • Setting the project quality objectives and relevant standards to be achieved • Communication and collaboration with all relevant project stakeholders • Carry out supplier qualification and assessment; continuous further development of supplier quality • Preparation of quality-related tender documents (e.g. quality assurance agreement), evaluation of offers and support in contract negotiations with suppliers Your tasks as Quality Engineer - Be the Quality Engineer on the Electrical Package for the Dogger Bank South Projects reporting to the Project Quality Manager, Project/Package Manager, and line organisation on the scope of delivery. • Project planning, co-ordination and control of quality activities for the Electrical Contractor their Manufacturers, Fabricators, Civil Contractors, Installers and their supply chains, with the support of the Offshore Substation Fabrication and Civil Quality Engineers. • Implement contractual and corporate quality and technical requirements within the project package. • Plan and manage the production/installation monitoring and inspection of equipment at manufacturing plants, fabrication sites, onshore and offshore sites from design to handover to O&M/OFTO with all deliverables and checks. • Co-ordinate multi-disciplined teams of inspectors managed by the Quality Manager both onshore and offshore in the delivery of scope of works. • Evaluation of reports, inspection results and findings from Contractor and Employer Systems. • Capture all work progress, inspections, and non-conformities (NC) in the client's Quality inspection app and monitor and report on compliance and progress of work. Assess non-conformities, conduct root cause analysis and follow-up of correction and corrective action process. • Manage Document Deliverables to acceptance ready for handover to O&M/OFTO • Prepare tender documents (e.g., quality assurance agreements), evaluate tender returns, and support contract negotiations with suppliers as required. • Plan/conduct general quality monitoring/audits. • Perform supplier qualification and assessment and continuously develop supplier quality. • Collaborate with Project Quality Manager to identify and manage risks within the Projects. Your profile - Successfully completed university degree or significant experience with a (HNC/HND) in an HV Electrical Engineering Environment (or in a comparable field) as well as additional qualifications as quality auditor, quality manager or comparable. • Relevant professional experience and expertise in quality assurance, control/monitoring and management as well as comprehensive expertise in offshore wind farm components in general and substation electrical components in particular. • Extensive knowledge in the application of relevant international project and quality management standards as well as technical regulations and standards such as IEC, BSH, DNV, BS/EN/ISO and NORSOK etc. • Practical experience from the construction and/or manufacturing industry with a good understanding of OEM HVDC, electrical components and the Supply Chain. • Able to demonstrate a good understanding of quality requirements and risks in onshore and offshore environment and the associated standards. • Business fluent in written and spoken English with a very good knowledge of common IT tools and systems. • Motivation to independently and sustainably advance your cause and the ability to keep an overview at all times in hectic project business. • You are an empathetic, reliable and motivated team player with a willingness to travel in accordance client Travel Policies in delivery of scope of work.

Quality Manager

HR Business Partner  6-months initial  Nysa, Poland – hybrid work options available    This client is a global leader in materials technology. The organization focuses on clean mobility, sustainable materials, battery technologies, and high?performance recycling. Umicore operates multiple production sites globally, including key locations throughout Belgium and Poland.    Department Description and Responsibilities  The People & Organization (P&O) team at the Nysa site supports the full HR lifecycle within a rapidly growing industrial production environment.    Core responsibilities include:  <ul><li>Workforce planning & staffing support </li></ul><ul><li>Leadership & talent development </li></ul><ul><li>Labor relations & social dialogue </li></ul><ul><li>HR compliance & policy governance </li></ul><ul><li>People analytics & reporting </li></ul><ul><li>Employee engagement & communication </li></ul>  Project Description  This client is seeking a Site P&O Lead (HR Business Partner) to strengthen the P&O operations at the Nysa location.    This role combines strategic HR Business Partnering with hands on operational work, in close collaboration with site leadership, HR coaches, and global P&O teams.    Key domains for 2026 include:  <ul><li>Implementing Career Development frameworks </li></ul><ul><li>Integrating IATF/automotive quality requirements into HR processes </li></ul><ul><li>Improving labor relations and managing union interactions </li></ul><ul><li>Rolling out Absenteeism & Return to work programs </li></ul><ul><li>Executing Stay Interviews & People Survey action plans </li></ul><ul><li>Ensuring policy review, compliance, and harmonization </li></ul>  Primary Tasks and Responsibilities  <ul><li>Lead and execute HR projects relating to career frameworks, competence models, and quality integration </li></ul><ul><li>Prepare and execute training, communication, and rollout of key P&O initiatives </li></ul><ul><li>Strengthen labor relations and ensure compliance with Polish labor law </li></ul><ul><li>Support and challenge management on workforce, talent, and organizational topics </li></ul><ul><li>Facilitate survey sessions, team dialogues, and engagement workshops </li></ul><ul><li>Audit, update, and standardize HR policies, procedures, and SOPs </li></ul><ul><li>Provide operational coaching to HR team members where needed </li></ul><ul><li>Serve as the local point of contact for global HR implementations </li></ul><ul><li>Ensure documentation and reporting accuracy to meet audit and IATF standards </li></ul>  Technical Profile Requirements  <ul><li>Min 7yrs. HR Business Partner experience in industrial environments </li></ul><ul><li>Strong knowledge of Polish labor law and experience working with trade unions </li></ul><ul><li>Experience implementing HR frameworks (career paths, competency models) </li></ul><ul><li>Understanding of IATF or other automotive quality standards </li></ul><ul><li>Experience with HR compliance, audits, and procedural governance </li></ul><ul><li>Proficiency in MS Office </li></ul><ul><li>Experience with SAP SuccessFactors is a strong plus </li></ul>  Non-Technical Profile Requirements  <ul><li>Senior, confident professional able to work autonomously </li></ul><ul><li>Strong stakeholder management & communication skills </li></ul><ul><li>Hands-on mindset: strategic yet willing to support operational tasks </li></ul><ul><li>High adaptability to a complex and evolving environment </li></ul><ul><li>Culturally aware and strong interpersonal skills </li></ul><ul><li>Able to manage sensitive cases with discretion and integrity </li></ul>  Language Proficiencies  <ul><li>Native Polish </li></ul><ul><li>Fluent English </li></ul>  Location  <ul><li>Main location: Nysa </li></ul><ul><li>Minimum 3 days per week onsite </li></ul><ul><li>Increased onsite presence during onboarding period </li></ul>  Contract  <ul><li>Start date: ASAP </li></ul><ul><li>First contract of 6 months, extension possible </li></ul>

HR Business Partner

Control & Instrumentation Engineer for Battery Projects (Battery Planning) Voerde & Biblis 01/05/2026 – 31/12/2028    Key Responsibilities: <ul><li>Development and preparation of C&I concept designs.</li><li>Translation of project requirements into technical specifications.</li><li>Coordination of internal and external C&I interfaces in line with project requirements.</li><li>Preparation of the technical section of tender documentation.</li><li>Identification of required components for the C&I system and definition of specifications, considering standards, best engineering practices, and RWE experience.</li><li>Development of a project schedule for procurement, engineering, installation, and commissioning of the C&I system.</li><li>Technical evaluation of supplier bids.</li><li>Support during contract negotiations.</li><li>Reporting on the technical project status to the Project Manager.</li><li>Execution of design reviews.</li><li>Management of technical interfaces with other disciplines/work packages, contractors, and stakeholders.</li><li>Preparation, review, and approval of technical C&I documentation.</li><li>Preparation and organization of all technical documentation required for installation and commissioning, and handover to the Site Manager.</li><li>On-site supervision when activities fall within own responsibility or when specific project team support is required.</li></ul>  Key Qualifications <ul><li>Relevant professional expertise in control and communication engineering planning.</li><li>Ability to quickly become familiar with BESS-specific control systems, including:</li><li>Battery Control System (BCS)</li><li>Energy Management System (EMS)</li><li>SCADA systems</li><li>Remote control interfaces (control room, operations and maintenance, grid operator)</li><li>C&I data networks</li><li>IT/OT infrastructure</li><li>Plant monitoring systems (e.g., CCTV systems, fire alarm systems, intrusion detection systems, electronic access control)</li><li>Proficient knowledge of MS Office applications.</li><li>Strong communication skills and ability to work collaboratively in a team.</li><li>Independent and self-driven working style.</li><li>Responsibility for lead execution of C&I work packages.</li></ul>  German speaking is a must

Control and Instrumentation Engineer (Battery Planning)

Cost Engineer Sofia, Vanguard and Dogger Bank Swindon – hybrid work options available 13/04/2026 – 30/11/2026 Key Responsibilities: <ul><li>Creation and administration of forecasts for the costs of the Offshore wind projects, maintaining a schedule of the forecast cash flow from the Investment decision to final completion</li><li>Record and monitor the financial impact of change requests and communicating outcomes and consequences with the Project Management Team.</li><li>Control and monitor project total expenditure including verifying and checking of invoices and claims from suppliers, vendors and sub-contractors to ensure that all project expenditures are captured and properly recorded.</li><li>Identify and monitor financial risks and clearly present these to the Project Finance Director</li><li>Support the monthly reporting including the preparation of financial information on the project for Project Financing requirements and shareholders as required.</li><li>FX hedge monitoring and maintaining inputs necessary for hedge accounting</li><li>Support the valuation of OFTO assets and input as necessary into the transaction process for the regulated divestment.</li><li>Ensure internal controls are being adequately applied e.g Delegation of Authority for client's investment spend , controls detailed in specific project shareholder agreements or local country specific procedures etc</li><li>Development and maintain good working relationships with all internal stakeholders as required to ensure clear visibility on the status of the tasks above to both project and line management.</li></ul> Key Qualifications: <ul><li>Knowledge and understanding of contract(s) of assigned packages for a construction project in the renewables market or comparable large infrastructure project is essential</li><li>Advanced Excel proficiency is essential</li><li>SAP or Similar ERP system knowledge is an advantage</li><li>English as a working language is essential, other European languages an advantage</li><li>Quantity surveyor qualification or similar an advantage</li><li>Good communication and organisational skills</li><li>Ability to work in a dynamic and global environment with an entrepreneurial attitude</li><li>Ability to manage relationships with a variety of stakeholders in a matrix organisation</li></ul> Must have Qualification / Experience: <ul><li>Project and Cost management, Advanced Excel. Experience in energy construction projects</li></ul> Nice to have: <ul><li>SAP, QS</li></ul>

Cost Engineer

Category Manager Duration: 28/04/2026 to 31/12/2026 Location: Antwerp Rotation: Monday-Friday, 8 hours Type: Freelance contract Description: Client information <ul><li>This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively.</li></ul> Department Description and responsibilities <ul><li>As a Category Manager Auxiliary Equipment at company corporate procurement you will develop and implement category strategies that contribute to cost efficiency, service quality, and sustainability, in line with the company's broader procurement objectives. You will collaborate with internal stakeholders and project teams worldwide to achieve the best solutions and promote best practices within the organization. You will report to the Lead Category Manager "Shipyards, Machinery & Equipment" and lead a team of Category buyers and Operational buyers.</li></ul> Primary Tasks and responsibilities <ul><li>Develop and execute a category strategy to optimize cost, quality, and efficiency</li><li>Manage relationships with internal stakeholders;</li><li>Guide and lead a team of Category Buyers and Operational buyers to execute procurement activities in accordance to agreed service levels;</li><li>Get directly involved in high value / critical spot buys and framework agreements;</li><li>Manage performance of category team reporting and tracking KPI’s;</li><li>Conduct market research (knowledge of suppliers, state-of-the-art technology, etc.)</li><li>Develop and sustain supplier relationships with key suppliers</li><li>Ensure compliance with sourcing procedures and contract management;</li><li>Monitor market trends and identify opportunities for process improvements, cost reductions, and innovation.</li></ul> Technical profile requirements <ul><li>Minimum 10 years of experience in strategic purchasing, category management or logistics management</li><li>Experience in the maritime and/or civil infrastructure company is a plus</li><li>Proven experience in coaching and leading a team;</li><li>Strong commercial and negotiation skills with the ability to manage high-value contracts.</li></ul> Non-Technical profile requirements <ul><li>Fluent in English; additional languages are a plus;</li><li>A strategic mindset, hands-on approach, and the ability to drive change;</li><li>Experience in supplier relationship management, contract negotiation, and procurement best practices;</li><li>A results-oriented team player with excellent stakeholder management and problem-solving skills;</li><li>Ability to thrive in a dynamic, international environment.</li></ul> Methodology/Certification requirements <ul><li>Bachelor’s or Master’s degree in engineering, Business Administration, Applied Economics, or Supply Chain Management;</li></ul> Language proficiencies <ul><li>Native English, proficiency in Dutch is a plus</li></ul>

Category Manager

Wind Turbine Generator Package Manager Location: Base Location can be either Swindon or London. Role is to support a project in Japan - Some international travel will be needed. Duration: 04/05/2026 to 02/04/2027 Rotations: Monday-Friday, 8 hours a day Project: Noshiro Mitane Type: Freelance contract – outside IR35 Description: The WTG Package Manager is accountable for the planning and delivery (engineering, procurement, construction, manufacturing, installation, commissioning and Taking-Over ) of the wind turbine Package of Works until handover to Operations, including the management of HSE, scope, risk, quality, budget, resource, and time scheduling in line with the project objectives and governance, with a view of LCoE optimisation. Key tasks and responsibilities: In particular, but not limited to: • provides HSSE leadership and ensures that HSSE is managed throughout the package by all team members and contract partners in accordance with the company’s established HSSE principles; • leads a team of experts assigned to the package and promotes a collaborative, transparent and supportive culture within the package and their interaction with other project roles; • manages the package in accordance with the company’s essential behaviours, established standards for project management, quality and within the project’s Delegation of Authority; • ensures clear lines of communication internally and with external contract partners; • oversees the engineering process and ensures that safety in design and operational aspects are adequately considered; • oversees the procurement process (tender, supplier selection and contract negotiation) until contract signature; • serves as Employer Representative under the Conditions of Contract; • manages the overall package budget; • identifies and manages package risks and opportunities; • ensures compliance with internal policies and external legislation; • fosters knowledge exchange with other projects and ensures that lessons • learnt are implemented, whilst capturing future lessons learnt during the • package life cycle; and • recognises the Operation team as the end customer and ensures that the WTG package can be operated / maintained in a safe and efficient manner. Qualifications and Experience • Engineering degree from an accredited university in a relevant subject (Civil, Structural, Mechanical, Ocean, Naval, etc); • Circa 10 years relevant industry experience; • Professional Engineer / Project Manager, with experience managing design and or engineering teams; • Experience in Offshore Wind, Onshore Wind, Offshore Oil and Gas, or other large engineering infrastructure projects; • Proven experience in major contract negotiations and contract management of large infrastructure projects (ideally offshore wind); • Excellent logical thinker, communicator, organiser, package lead and team player; • Demonstrable experience of working effectively in an international business; and • Fluent in spoken and written English (Japanese is desirable, but not essential).

WTG Package Manager

Site Adminstrative Coordinator  Position: Fixed-term project contract (CDIC) Location: Bricquebec-en-Cotentin (Normandy), on-site 5 days/week The Opportunity The Site Administrative Coordinator supports the Site Manager and the entire site team with all administrative tasks. They contribute to maintaining a structured and organized site office, apply approved operational and project processes, and enable technical teams to focus on their core activities. The Site Coordinator maintains an overall view of site processes and resources, identifies low value-added activities, and optimizes operations within their scope of responsibility. They report hierarchically to the Project Site Manager to whom they are assigned, and functionally to the Head of Construction & Commissioning (C&C) Site Support. Depending on workload, this role may be combined with that of Site Document Controller and/or Site Logistics Coordinator. Your Impact • Collect, organize, and manage progress reports • Contribute to the creation of presentations (progress, site, project, management) • Participate in meetings, write and distribute minutes, and follow up on actions • Carry out or coordinate site onboarding and support new employees • Monitor timesheets and working hours; maintain history (tables, charts) and share with relevant departments • Maintain an up-to-date register of the client personnel on site • Provide reporting support to the site team • Implement operational processes and contribute to continuous improvement • Identify and eliminate non-value-added activities • Maintain records, databases, filing systems, and archives (paper and electronic) • Perform various general administrative tasks and provide backup during absences or workload peaks • Organize or coordinate document translation • Track delivery status • Manage shipment and receipt of parcels • Administer housing, site vehicles, and local transportation • Manage site offices and facilities • Introduce new arrivals to administrative processes and site routines • Maintain regular contact (as authorized) with local suppliers and subcontractors (cleaning, security, etc.) • Monitor office supplies and availability of visitor PPE • Coordinate travel arrangements for staff and visitors with mobility services and construction/commissioning managers Your Profile Education: Bachelor’s degree (Bac 2 / Bac 3 equivalent) in: • Administration • Business Support / Office Management • Logistics • Project Management • QHSE Support • Operational Support Experience: 2 to 5 years of experience in one or more of the following areas: • Site administration • Project coordination / support • Site office management • Logistics and document management • Support to construction / commissioning / engineering teams Experience in a construction / energy / EPC / industrial environment is a strong advantage. Languages: • French and English: good level required (interaction with international teams, suppliers, and visitors) • Can be a contract or a perm position open for both

Site Administrative Coordinator

Party Chief – Senior Duration: 01/07/2026 to 02/12/2026 Rotation: 4/4 Location: International Waters (Netherlands) Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Department Description and responsibilities The Party Chief Will be involved only with the inshore section survey works during project mobilization, execution, as built and demobilization phase. Primary Tasks and responsibilities - Responsible for the execution of all survey related works involved on the Project. - Ensure that the survey activities are planned and performed according to the quality, HSE procedures. - QA/QC all survey data. - Check all data meets project specific requirements. - Distribute all data needed to support cable laying and trenching vessel. - Distribute the data to the Company according to delivery schedule. - Discuss and communicate the survey results with the Project Team. - Prepare GIS Data. - Solving problems with survey equipment and software, - Reports to Chief Surveyor. Technical profile requirements -Minimum 5 years’ experience as a Party Chief -Work experience for cable shore pull and installation and dredging operations: Total station experiences - Network experiences - Octans & GNSS experiences, -Strong knowledge of hydrographic survey techniques, equipment and trenching -Experience with offshore navigation and positioning systems (Bricscad, Qinsy, Civil3D, QGIS / Arcgis Pro, DTPS, NavaQ, Tendo -Additional experience with subsea acoustic positioning systems and multibeam. Non-Technical profile requirements -Excellent problem-solving and analytical skills. -Effective communication and teamwork abilities. -Attention to detail and a commitment to producing accurate results. -Willingness to work in various locations and adapt to project-specific requirements Methodology/Certification requirements -Bachelor’s degree in surveying, Geomatics, or a related field. Certifications required: -Full GWO -Offshore medical - (other certificates to be confirmed) Language proficiencies -Fluent speaking and writing English, proficiency in other languages is a major plus

Party Chief Senior

Project Engineer (GFN) – Area West – Gouda, Zeeland Hours per week: 36–40 Experience: 5 years What will you do? As a Project Engineer, you are the technical specialist for complex (electrical) engineering and infrastructure projects in and around high-voltage substations in the western region of the Netherlands. Your scope includes components of all high- and low-voltage installations at our substations—primary, secondary, and civil. You are responsible for answering engineering-related questions, checking design quality, and providing technical support during execution when needed. You ensure a smooth design process throughout various phases of the project. To do this, you work closely with engineers from other disciplines, project teams, and the asset management/operations organisation. You monitor the progress and quality of designs produced by contractors and issue assignments to engineering parties. You also ensure the correct delivery of all as-built documentation. The work primarily focuses on one-to-one replacements, customer connection modifications, and secondary system renovations. You work under the guidance of the Lead Engineer and Project Manager and coordinate technical issues with Asset Management. You are the technical point of contact for contractors and engineering partners within your area of expertise, and you help determine which deviations from specifications may be accepted. As a Project Engineer, you fall hierarchically under Area West, are part of multiple project teams, and report to the Lead Engineer of the respective project. Key Responsibilities • Preparing, interpreting, and applying technical specifications and (international) standards, guidelines, and norms •Reviewing tender documents and responding to technical questions •Monitoring progress and signalling deviations in scope, quality, or timelines for your part of the technical work package •Acting as point of contact for contractors and timely reviewing submitted work packages, drawings, calculations, and other technical documents •Advising on technical alternatives when bottlenecks arise Profile • Completed education in Electrical Engineering or Power Engineering • Broad knowledge of high-voltage components, controls, and interfaces with the technical environment • Ability to review designs and calculations made by third parties • Knowledge and experience with contract forms such as Bestek, UAV, UAV-GC, System-Oriented Contract Management (SCB), and Systems Engineering (e.g., using Relatics) is an advantage • Enjoys working in a more supervisory and coordinating role, at some distance from day-to-day design work Practical Information •Location: Gouda (Thursday is a fixed office day). Other days hybrid/negotiable. Project teams may meet every 2 weeks at a project site or regional office, so some travel flexibility is required.

Project Engineer

Senior Project Manager   Location: Hybrid with periodic travel to Swindon and London offices (Onshore) Duration: 01/06/2026 to 01/06/2027 Rotation: Monday-Friday Type: Freelance Outside IR35   Description:   As a Senior Project Manager, you will be responsible for the delivery of a world leading offshore windfarm for RWE Renewables UK. The role sits on the Project Leadership Team (PLT) and currently reports into the [Development] Project Lead, and comprises assuming overall responsibility for leading a large, multi-discipline project team progressing preparatory works incl. Health, Safety and Environmental (HSE) management, engineering, procurement, and project management required to ensure that the project is ready to commence the Construction Phase at the time of taking Final Investment Decision (FID). The project team will also be required to provide support in the form of technical and commercial input to the preparation of business cases, and value optimisation activities required to take FID.     As a Senior Project Manager, you will be responsible for the delivery of a world leading offshore windfarm for RWE Renewables UK. The role sits on the Project Leadership Team (PLT) and currently reports into the [Development] Project Lead, and comprises assuming overall responsibility for leading a large, multi-discipline project team progressing preparatory works incl. Health, Safety and Environmental (HSE) management, engineering, procurement, and project management required to ensure that the project is ready to commence the Construction Phase at the time of taking Final Investment Decision (FID). The project team will also be required to provide support in the form of technical and commercial input to the preparation of business cases, and value optimisation activities required to take FID. What we are looking for • Experienced leaders who have successfully managed large, multi-disciplinary and multi-cultural project teams and built local project management capability • Demonstrable commitment in the form of a track record of delivering projects in full compliance with International and Local regulations and to the highest standards of Health, Safety and Environmental management. This would include experience managing the health and safety of a project team, compliance with and implementing the Construction (Design and Management) (CDM) Regulations 2015, and planning and implementing effective contractor HSE performance management. • Experience of providing assurance that the windfarm can be constructed without harm to people or the environment and in a fashion that the quality and technical performance requirements can be satisfied within the cost and schedule targets that formed the Final Investment Decision • Ability to define, establish and maintain a project delivery capability comprising people, processes and systems that safely and efficiently delivers the project throughout its lifecycle • Previous responsibility for ensuring that all the construction contracts and support contracts are managed effectively and deliver as per the project plan • Proven ability to coordinate cross-disciplinary activities between subprojects, e.g. in the fields of permit, commerce, finance, site and operations • An understanding of common technical, commercial and stakeholder risks of performing offshore construction activities • Experience of applying techniques to influence others to deliver results You will have • Qualifications to degree level in an engineering discipline or equivalent science/numerate qualification • Membership of a project management professional body and/or accreditation would be advantageous • At least 10 years of experience of safely delivering complex offshore construction projects, preferably involving HV electrical systems and wind turbines to quality, schedule and cost expectations • Experience of successfully representing your company in engagements with a wide range of key stakeholders Location: London or Swindon

Senior Project Manager

Project Risk Manager  Location: GB London EC2R 8HP 60 Threadneedle Street Duration: 01/05/2026 to 01/05/2027 Rotation: Monday-Friday Type: Freelance Outside IR35 Project: Dublin Array / Boreas     Overview of Role: • To lead on Risk Management duties for multiple Offshore Wind Farms on the East Coast of the UK, supporting the project through Bids, FID, Design, Manufacturing and Construction • To lead and ensure identification, assessment, mitigation and escalation of project risks to the Project SteerCo and Finance Director • To Lead on all Risk and Opportunity topics for the project • To ensure that all Project Risk Management activities are conducted within the RWE processes and procedures within the business • To provide QRA values for monthly reporting, contingency calculation and business case assurance Key Responsibilities: • Detailed knowledge of Offshore Wind Development & Construction • Detailed knowledge of Project Risk Management • Detailed knowledge of QRA, SRA and tools such as SAFRAN and Active Risk Manager • Experience of deploying Risk Manager on major Civil or Offshore Construction Projects through Design, Manufacture and Construction • Experience of Schedule Risk Analysis, Stress Testing, Pre-Mortem, QRA • Experience of Reporting and providing information to Board Level, Project Director and Senior Project Managers • Updated package and project Risk Values in line with monthly reporting timescales • Undertake Project Risk Workshops, Stress Test Workshops • To conduct scenario planning, what-if analysis, schedule risk analysis • Ensure project risk registers are maintained and up to date • Communication of QRA values and potential project contingency values

Project Risk Manager

Onshore Landfall Site Manager Location: Happisburgh NR12 - South Denes Road, Great Yarmouth Duration: 01/04/2026 to 30/04/2027 Project: Norfolk Vanguard West and East OWF Type: Freelance, outside IR35 Role description: The Onshore HDD Landfall Site Manager will support the Offshore Site Manager (OSM) in the management of the site establishment and works co-ordination for the Onshore PC Zone 3 Site, at Happisburgh NR12, for the completion of HDD and the subsequent installation, jointing and testing of 2x 320kV offshore cables plus associated. Experience of the management of offshore wind farm construction, including an appreciation of the Principal Contractor duties under the CDM (2015) Regulations is required. The scope of works will be carried out at the Principal Contractor construction coordination base in Norfolk, and the Onshore PC Zone 3 Site, at Happisburgh NR12. Flexible working hours will be essential given the 24-hour offshore construction process, and it is expected that the Onshore HDD Landfall Site Manager will work with either a 10 on 4 off shift rotation or Monday to Friday with sufficient provisions for travel - yet to be defined. The Onshore HDD Landfall Site Manager will have the day-to-day responsibility for the coordination and management of works within the PC Zone 3 Site and related to the landfall installation of the offshore export cables. Reporting activity to line management and the wider project will be daily and weekly. There will be a requirement to attend and where relevant chair daily and weekly meetings attended by the GSM, OSM, Marine Coordinators, Permit Coordinators and all Contractors. Deliverables: • Coordination of onshore/nearshore export cable landfall related works through the Principal Contractor SSoW and offshore access control processes with the primary focus being the management of Health and Safety. • Marine Coordination activities and communications related to nearshore vessel operations • Monitoring via inspection the offshore/onshore works to ensure works are being conducted in accordance with accepted written instructions and in compliance with relevant legislation and industry best practice • Reviewing and accepting on behalf of the PC all written instructions. This will involve detailed understanding of the onshore / offshore construction works for an offshore wind farm and the ability to advise on working methods and written instruction submissions and to react to the daily changing circumstances that can occur. • Attend and where relevant chair daily and weekly meetings attended by the GSM, OSM, Marine Coordinators, Permit Coordinators and relevant Contractors. • Supporting the Principal Contractor and Contractor construction management teams in the execution of their roles. • Providing defined construction reports, for inclusion in the monthly Project report. • Raising alerts to any perceived trends relating to HSE risks or transgressions developing onshore / offshore as they arise, e.g. Early Warning. • Instructing the Contractor to stop the Works where there is an immediate significant health and safety risk, or risk associated with protection of the environment. • Promptly identify and notify on any construction issue that may arise or have the potential to arise during the works and shall aid in resolving any issues where applicable. • Maintain quality assurance processes including inspections, test records, red-line drawings, and as-built documentation. • Coordinate with local authorities, landowners, and environmental bodies to ensure compliance with planning and ecological requirements Experience: - Extensive experience providing similar services in offshore renewables - An excellent understanding of construction practices, heavy lifting, sheet pilling, marine management and HV commissioning. - An understanding of the appointed rolls under CDM (2015) and UK Health and Safety requirements Previous experience of: o Work preparation o Work sequence planning o Simultaneous Operations assessment o Health and safety oversight o Quality management o Environmental management o Excellent communication skills Certifications: • CSCS (Construction Skills Certification Scheme) minimum • SMSTS (Site Management Safety Training Scheme) • All GWO’s including medical with Chester step test would be advantageous • NEBOSH General or Construction Certificate or IOSH Managing Safely • Marine VHF Short Range Certificate would be advantageous • Degree or HNC/HND in Civil, Mechanical, or Electrical Engineering (or equivalent experience). • Full UK driving licence. • (TW) Temporary Works Coordinator certification desirable. Site location: Onshore PC Xone 3 site, at Happisburgh NR12 If candidates lives far from site ( 10 days on 4 days off) if candidate leaves close to site (MO-Fri - 40 hours)

Onshore Landfall Site Manager

Senior BESS Integration & Plant Control Engineer <ul><li>Project Name: HOW03 BESS</li><li>Duration: 07-Apr-2026 - 31-May-2027</li><li>Job Classification: Electrical Systems</li><li>Primarily remote (UK-based preferred), with travel to Norwich and London</li><li>Bring own PPE</li><li>Mon – Friday</li></ul> Description Project: 300MW BESS integrated with 2.6GW Offshore Wind Farm via HVDC Role Overview We are seeking a specialist engineer to support the BESS Technical Lead with the integration of a large-scale Battery Energy Storage System (BESS) with a major offshore wind farm connected via HVDC. This is a technically challenging and high-profile role focused on ensuring robust integration between the BESS, HVDC system, offshore wind plant, control systems, trading and optimisation platforms, and operational stakeholders. The role has a particular emphasis on the BESS interfaces and requires an engineer who can provide input into the development of the operating philosophy, control philosophy, and interface design across multiple systems and parties. This individual will play a key role in ensuring the integrated system is operable, reliable, commercially optimised, and validated through practical testing that the BESS is grid code compliant. Key Responsibilities 1. BESS–HVDC–Offshore Wind Integration <ul><li>Support the design and coordination of the control interfaces between the BESS and HVDC system across a range of operating scenarios.</li><li>Define and manage key integration interfaces between the BESS, offshore wind farm, HVDC controls, plant controllers, and other relevant OEM systems.</li><li>Support the BESS Technical Lead to provide input into the development of the overall integrated operating and control philosophy for the BESS, HVDC system, and offshore wind plant.</li><li>Support the BESS Technical Lead working closely with OEMs and project stakeholders to ensure the integrated solution is correctly designed, built, tested, and commissioned.</li></ul>2. Trading, Revenue & Operational Interfaces <ul><li>Lead the definition of BESS interfaces related to trading, dispatch, and revenue optimisation, including interfaces with the optimiser platform.</li><li>Ensure control logic and system design appropriately reflect network constraints, including restrictions arising from shared grid connection arrangements, offshore wind generation conditions, HVDC operating constraints, and wider transmission system limitations.</li><li>Develop the functional approach to automatically limit or adjust traded power when plant or grid constraints apply.</li><li>Coordinate interfaces between the BESS and the trading optimiser, the BESS OEM for warranty, maintenance, and condition monitoring signals, and the 24/7 control centre supporting NESO and the BESS owner/operator.</li></ul>3. Technical Leadership & Interface Management <ul><li>Provide technical leadership across complex multidisciplinary interfaces involving controls, SCADA, commercial/trading systems, OEM platforms, and grid compliance functions.</li><li>Act as the glue across multiple technical and commercial workstreams to ensure a coherent and reliable end-to-end solution.</li><li>Manage model and interface coordination between different OEMs, particularly where control interactions between the BESS and HVDC are critical.</li><li>Work closely with the Plant Control Engineer for the HVDC and offshore wind plant to ensure aligned design and testing.</li><li>Work closely with the Lead BESS HV Engineer to ensure aligned design and testing.</li></ul>4. Grid Code Compliance & Testing <ul><li>Lead the BESS aspects of UK grid code compliance planning and testing by working closely with the Plant Control Engineer for the HVDC and Offshore Windfarm as well as the overall commissioning team.</li><li>Support and coordinate compliance activities with NESO, including a practical understanding of E-ON, I-ON A, I-ON B, and FON working closely with the Design & Compliance Manager as well as the Grid Connection Manager.</li><li>Good understanding of operational tripping schemes and the compliance testing associated with this.</li><li>Ensure that control design, plant operation, and interface behaviour support successful compliance demonstration.</li><li>Coordinate with specialists responsible for compliance studies, testing, and technical evidence packages.</li><li>Develop Grid Code Compliance test procedures using client templates and formatting that are familiar to NESO.</li><li>Prepare Grid Code Compliance test results and reports using client templates and formatting that are familiar to NESO.</li></ul>5. Integrated Control Design Documentation <ul><li>Produce and maintain the integrated documentation required to pull together inputs from different packages, contractors, and OEMs for the BESS control design implementation.</li><li>Develop clear, structured documentation covering operational modes, operational tripping philosophy, control schemes, and key interface definitions.</li><li>Ensure documentation clearly defines interfaces with neighbouring systems, including the HVDC system, offshore wind plant, plant control systems, control room, trading and revenue, Optimiser, the Transmission System Operator (TSO).</li><li>Coordinate across packages and stakeholders to ensure documentation is aligned, complete, traceable, and suitable to support design, implementation, testing, commissioning, and operations.</li></ul> Why This Role? <ul><li>The successful candidate will be supported by experienced teams across HV, protection, SCADA, metering, commercial, trading, and revenue, as well as receiving training and support from the optimiser provider. This role offers genuine scope for growth, learning, and technical leadership.</li><li>If solving complex engineering challenges across BESS, HVDC, and offshore wind integration motivates you, this is an exceptional opportunity.</li><li>The Consultant must bring his/her own PC and/or Iphone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up to date with the latest iOS release. The owner must allow client’s AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client’s security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with client’s AirWatch security and management software.</li></ul> Requirements: Essential <ul><li>Strong experience in the integration of Battery Energy Storage Systems (BESS) into complex power projects.</li><li>Demonstrable experience with control interfaces between the BESS and other plant systems, ideally including HVDC, renewable generation, or grid-connected infrastructure.</li><li>A basic understanding of communication network infrastructure and cyber security.</li><li>Good understanding of BESS trading, dispatch, and revenue optimisation interfaces in the UK market.</li><li>Experience defining or managing interfaces with optimisers/trading platforms, OEM control systems, SCADA and plant control systems, and remote operational/control centres.</li><li>Strong understanding of how shared grid connection constraints impact BESS operation and traded power availability.</li><li>Experience with co-located BESS projects sharing a grid connection with other generation assets, such as offshore wind, onshore wind, solar, or other generation plant.</li><li>Ability to develop and manage an integrated operating and control philosophy across multiple systems and stakeholders.</li><li>Good working knowledge of UK grid code compliance processes for large grid-connected plant, including practical awareness of testing and energisation stages.</li><li>Understanding of REMIT considerations regarding trading and implication of where data/signals are sent.</li><li>Experience producing integrated technical documentation that consolidates control design inputs, operating philosophies, trip logic, and interface requirements across multiple OEMs and packages.</li></ul> Desirable <ul><li>Experience working on projects involving HVDC-connected offshore wind.</li><li>Broader understanding of power systems and control interactions, sufficient to manage technical interfaces and challenge OEMs effectively.</li><li>Familiarity with grid code compliance studies, even if not personally conducting PSCAD or PowerFactory simulations.</li><li>Awareness of related areas such as SCADA integration, metering interfaces, protection interactions and control room operations.</li><li>Prior experience coordinating across multiple OEMs and contractors in a complex delivery environment.</li></ul> Technical Capability Profile The successful candidate will not be expected to personally carry out PSCAD or PowerFactory studies, but should have sufficient knowledge of power system behaviour, control interactions, and dynamic plant integration to: <ul><li>understand the implications of study outputs.</li><li>manage technical discussions with OEMs and consultants.</li><li>review interface assumptions.</li><li>ensure appropriate integration between BESS and HVDC control systems; and</li><li>support the delivery of a technically robust and compliant solution.</li></ul> Qualifications <ul><li>Degree in Electrical Engineering, Control Systems Engineering, or similar relevant discipline.</li><li>Master’s degree preferred.</li><li>A solid background in control theory, and practical site experience especially grid code compliance testing.</li></ul> Location & Travel <ul><li>UK-based candidates are strongly preferred.</li><li>The role is primarily remote, but regular travel will be required.</li><li>The project site is in Norwich, and the optimiser provider / employer offices are in London.</li><li>Candidates should expect travel of approximately 1–2 days per week, depending on project phase.</li><li>During key periods—particularly grid code compliance testing, initial energisation, and early operational phases—a greater site presence in Norwich will be required to support issue resolution and successful delivery.</li><li>For site visits, the consultant must bring their own work clothes and basic PPE.</li></ul>

Senior BESS Integration and Plant Control Engineer

SCADA Engineer Representative (Senior) Project Name: HOW03 – Offshore Duration: 01-Apr-2026 - 31-Dec-2026 Rotation: 14/14 Inside IR35 Description: The S&C Commissioning Engineer Representative is a critical execution role responsible for ensuring that SCADA commissioning activities are delivered safely, on time, and to the required technical and quality standards across both onshore and offshore environments. The role sits at the intersection of engineering, site execution, and stakeholder coordination, with direct impact on the successful energisation and handover of Substation Control Systems and Metering. The position requires a strong on-site presence, including offshore work during key commissioning phases, where the ability to operate effectively in a high-pressure, multi-contractor environment is essential. The individual is expected to take ownership of day-to-day commissioning execution, ensuring that progress is maintained, risks are actively managed, and technical integrity is upheld throughout. A central part of the role is to lead and coordinate SCADA commissioning activities across interfaces. This includes close collaboration with SCADA contractors, electrical commissioning teams, and project stakeholders to ensure alignment with the overall commissioning plan. The role is not limited to coordination but requires active supervision and management of commissioning personnel and activities, ensuring that testing is executed correctly, documented properly, and aligned with project requirements. The S&C Commissioning Engineer Representative is responsible for maintaining a clear and accurate overview of commissioning progress, providing structured reporting to the SCADA Package Manager and Commissioning Manager. This includes highlighting deviations, driving corrective actions, and ensuring that delays or quality issues are addressed proactively. The role requires a high level of ownership in maintaining momentum on site and removing execution barriers as they arise. Quality assurance and compliance are core elements of the role. The individual ensures that all commissioning activities are carried out in accordance with project HSE standards, internal requirements, and applicable local legislation. This includes validating contractor deliverables, approving checklists and test documentation, and ensuring full traceability across commissioning activities. The role also involves driving the completion and closure of snagging activities to ensure a clean and compliant handover. From a planning perspective, the role contributes actively to the development and maintenance of commissioning schedules and plans. This includes defining scope, timelines, and QA/QC requirements for SCADA commissioning, as well as ensuring that the necessary resources are available to execute the work. Where gaps or constraints are identified, the role is expected to escalate and request additional support to maintain delivery commitments. The technical scope of the role includes commissioning of Substation Control Systems and Metering, with active participation in FAT, SAT, and SIT activities. The individual plays a key role in ensuring that systems are tested, validated, and integrated correctly, and that all documentation supporting these activities is complete and approved. The position carries a significant degree of responsibility and decision-making authority in relation to commissioning execution. The individual is expected to initiate actions required to maintain progress, propose changes where necessary, and ensure that the commissioning strategy is effectively translated into site-level execution. To succeed in this role, the candidate must bring a solid technical foundation combined with proven experience in project execution or commissioning environments. A background at B.Sc. level or equivalent is expected, along with relevant project management experience and preferably certification such as IPMA or PMP. Just as important is the ability to lead in a site-based environment, manage multiple stakeholders, and drive structured execution under pressure. Given the nature of the role, offshore work is a mandatory requirement. The candidate must be willing and able to work offshore for extended periods and hold the necessary GWO and safety certifications. The role requires both the physical readiness and the mindset to operate in offshore conditions where planning, discipline, and decision-making have immediate operational consequences. Ultimately, this role is defined by execution impact. Success is measured by the ability to deliver commissioning activities safely, efficiently, and without compromising quality, while ensuring that all systems are ready for handover in line with project expectations. Travel As per clients Global Travel Policy for External Consultants and Expense Policy for External Consultants. Training: Training costs approved by HOW03 Project team are to be invoiced directly to clients in the same way as travel expenses. The Consultant must bring his/her own iPhone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up to date with the latest iOS release. The owner must allow client’s AirWatch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by client staff (including External consultants) to protect them from cybercrime. The owner must grant approval for client to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to client’s security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnit and/or client. When an external consultant leaves client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with client’s Air Watch security and management software. Requirements: Prior experience working on client projects is preferred. The consultant must demonstrate familiarity with client’s commissioning governance, reporting structures, documentation standards, and EPC delivery model. The consultant must have substantial hands-on experience with SCADA commissioning in large-scale infrastructure or energy projects, including direct experience with Hitachi Micro SCADA and Substation Control Systems. In-depth knowledge of National Grid requirements and grid compliance processes is essential, including practical experience ensuring that SCADA systems meet grid code obligations during commissioning. The consultant must be capable of managing these interfaces independently without requiring escalation for fundamental compliance matters. A minimum of five years of relevant experience is required, supported by a technical background at B.Sc. level or equivalent. Experience aligned with IPMA B/C, PMP, or equivalent project management frameworks is considered advantageous. Strong stakeholder management, structured documentation practices, and the ability to operate effectively in high-pressure commissioning environments are expected. Valid GWO certification is mandatory. This is a senior-level assignment. The selected consultant must be capable of operating independently from day one, requiring only project-specific onboarding and no foundational supervision.

SCADA Engineer

Geotechnical Engineer – Senior Duration: 13/04/2026 – 16/08/2026 Location: UK (London) Project Name: IOW0102 At least two days in the office – 30 hours per week 7.5 hours per day Key competencies: <ul><li>Have proven experience in offshore site characterisation and analyses of in situ data and laboratory test results</li><li>Have proven experience with processing and validating geotechnical data, including AGS data handling and with writing Geotechnical Interpretation Reports (GIRs)</li><li>Have knowledge of the geotechnical input required for foundation and cable design, installation constraints and understanding of the interfaces with different engineering teams</li><li>Have a high degree of personal responsibility and accountability and capable of working with different tasks in parallel</li><li>Have strong analytical, communication and stakeholder management skills and enjoy working closely with colleagues and project teams.</li><li>Must be able to speak and write English fluently</li><li>Must be results oriented</li></ul> Additional competencies: <ul><li>Have in-depth experience with planning and scoping of offshore geotechnical site investigations, including deep shallow and nearshore site investigation techniques</li></ul> Key Tasks <ul><li>Integrated ground model development working closely with clients Geophysical Site Characterisation Department</li><li>Geotechnical Parameter Interpretation using in situ and laboratory test data to create profiles to support foundation and cable design and installation</li><li>Use client in-house software, Python and/or Excel to perform analyses and present results</li><li>Prepare and QA geotechnical interpretive report and other deliverables to stakeholders</li></ul> Additional Tasks <ul><li>Prepare geotechnical site investigation scopes to support foundation and subsea cable design and installation</li><li>Advanced geotechnical parameter interpretation e.g. development of cyclic contours</li></ul> Requirements: Working location: UK (London). The candidate should default from our office at least 3 days a week, but this can be negotiated depending on the candidate. Desired start date: 13-04-2026 Workload: 0.75 FTE Contract period: fixed with option for prolonging The work will be performed under client quality assurance procedures and on clients digital platforms. Key competencies: <ul><li>Have proven experience in offshore site characterisation and analyses of in situ data and laboratory test results</li><li>Have proven experience with processing and validating geotechnical data, including AGS data handling and with writing Geotechnical Interpretation Reports (GIRs)</li><li>Have knowledge of the geotechnical input required for foundation and cable design, installation constraints and understanding of the interfaces with different engineering teams</li><li>Have a high degree of personal responsibility and accountability and capable of working with different tasks in parallel</li><li>Have strong analytical, communication and stakeholder management skills and enjoy working closely with colleagues and project teams.</li><li>Must be able to speak and write English fluently</li><li>Must be results oriented</li></ul> Additional competencies: <ul><li>Have in-depth experience with planning and scoping of offshore geotechnical site investigations, including deep shallow and nearshore site investigation techniques</li></ul> Key Tasks <ul><li>Integrated ground model development working closely with clients Geophysical Site Characterisation Department</li><li>Geotechnical Parameter Interpretation using in situ and laboratory test data to create profiles to support foundation and cable design and installation</li><li>Use clients in-house software, Python and/or Excel to perform analyses and present results</li><li>Prepare and QA geotechnical interpretive report and other deliverables to stakeholders</li></ul> Additional Tasks <ul><li>Prepare geotechnical site investigation scopes to support foundation and subsea cable design and installation</li><li>Advanced geotechnical parameter interpretation e.g. development of cyclic contours</li></ul>

Geotechnical Engineer

Supply Chain Officer – Junior Duration: 01/04/2026 – 29/5/2026 Type: Freelance Rotation: Mon-Fri 8 hrs per day Rate: Candidates expectations Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Primary Tasks and responsibilities As a Transport Coordinator you are responsible for assisting the Logistics domain within the Procurement organization to secure the supplies to the client's Fleet worldwide and to organize transport for our projects within the EU. Thorough administration, follow up on the planning and coordination with stakeholders are key to success. Contribute to the Logistic department of the client's supply chain, with: <ul><li>Secure supply towards our projects and vessels worldwide</li><li>“On Time - In Full” deliveries of ordered spares, consumables and project equipment, by using multimodal transport (air – sea – road - express)</li><li>Continuous improvement of our Logistic processes</li><li>Ensure the execution of the planning of frequently scheduled transport orders towards long term projects individual transport requests on daily basis</li><li>As you are owner of the transport order, the full responsibility, as there is operational, documentary, and commercial/financial, is yours.</li><li>You manage the assigned orders independently for which you are in daily contact with all parties concerned:</li><li>Work towards the clients values and expectations of your internal client with focus on bringing ‘added value’</li><li>Select the most suitable or new transporter suppliers in consultation with the procurement management, taking into account the quality-, service level and pricing;</li><li>Align all parties involved on planning with respect to the requested delivery dates, planned availability and optimization possibilities;</li><li>Check for and act upon specific and regional custom- and import regulations based on characteristics, the destination and the nature of the product;</li><li>Book the correct transport for dangerous goods, according to their characteristics and directives; as well as preparing all necessary documentation;</li><li>Instruct our transport-partners</li><li>Register and follow-up of shipments in the central computer system Maximo;</li><li>Resolve and register any related complaints; you have a problem-solving attitude towards related transport-orders;</li><li>Ensure follow-up and compliancy to client’s Requisition-to-Pay process for sourcing, contract PO’s and 3- way matching within the system Ivalua;</li><li>Support and liaise with all relevant stakeholders (Fleet ALD/ALO department, Warehouse, Procurement, Operations, Mob/Demob, …) and internal clients (projects and our fleet worldwide), by attending kick-off meeting, End-work-meeting, progress-meetings;</li><li>Implement the client’s safety policy as well as the national and international laws and regulations regarding road-, air- and sea-freights;</li><li>Support in benchmark studies, price studies and price negotiations;</li><li>Identify and report structural problems and systematic reporting of KPIs to the management in weekly team-meetings;</li><li>Answer customs-related questions of sites, agents and/or colleagues;</li><li>Perform any other department related tasks in the absence of colleagues.</li></ul> Technical profile requirements <ul><li>Bachelor’s degree in Logistics Management, Supply Chain Management, or equivalent through experience</li><li>You have minimum 1 years of experience in the logistics world, preferably with multi-modal means of transport (air, road, sea)</li><li>You have proper knowledge of legislation relating road, air or maritime transport</li><li>You have basic knowledge of customs regulations</li><li>Knowledge of regulations on dangerous goods is of added value</li><li>Very good knowledge and experience with the MS Office</li></ul> Non-Technical profile requirements <ul><li>You like administration and are accurate</li><li>Communication with stakeholders by mail and phone</li><li>You strive for structure and planning in an everchanging maritime environment</li><li>You are solution- driven, stress proof and providing service is a second nature</li><li>You are fluent in Dutch and English.</li></ul> Methodology/Certification requirements <ul><li>Bachelor’s degree in Logistics Management, Supply Chain Management, or equivalent through experience</li></ul> Language proficiencies <ul><li>Fluent in Dutch</li><li>Fluent in English</li></ul>

Supply Chain Officer

Electrical Technician – Senior 05/2026 – 12/2026 Olen, Belgium This client develops and produces advanced technological materials used in batteries, catalysts, electronics, and clean mobility solutions. Sustainability, innovation and operational reliability are at the core of the company’s strategy. This role sits within CRD General Services at the Olen site, responsible for the safe operation, maintenance and continuity of the site’s electrical distribution networks. The electrical distribution network — both high and low voltage — is essential to ensuring the site's safety, continuity and technical performance. You’ll support the department with the maintenance of transformers & switches, replacing parts, and installations. Most of the time this is high voltage, but low-voltage is also part of the package and installations. You’ll work very closely with your colleague(s) due to the 4-eye principle during the execution of your high voltage works. Primary Tasks and Responsibilities <ul><li>You share responsibility for the operation of the high? and low?voltage distribution network, ensuring safe and continuous power supply across the Olen site.</li><li>You prepare, plan and execute electrical work, ensuring compliance with all safety procedures, legislation, internal standards and technical regulations.</li><li>You perform preventive and predictive maintenance to detect issues early and avoid downtime.</li><li>You supervise and follow up work performed by external contractors, ensuring correct execution and safety.</li><li>You ensure accurate documentation and registration of all technical and administrative data related to executed work and observations.</li></ul> Technical Profile Requirements <ul><li>Technical degree, preferably with a background in electrotechnics</li><li>Proven Experience with high?voltage systems</li><li>Proven Experience with industrial low?voltage systems.</li><li>Ability to read and interpret electrical schematics (intake requirement).</li><li>Able to interpret technical documentation in Dutch & English.</li><li>Experience in an industrial environment.</li><li>Ability to correctly document actions and technical findings.</li></ul> Non-technical Profile Requirements <ul><li>Strong sense of responsibility and safety awareness.</li><li>Calm, mature and structured personality (intake requirement).</li><li>Able to work independently with initiative, drive and depth.</li><li>Decisive and results oriented.</li><li>Clear, objective communicator.</li></ul> Methodology / Certification Requirements <ul><li>BA4/BA5 — provided internally;</li><li>VCA is mandatory</li><li>AREI familiarity</li><li>ATEX familiarity</li></ul> Language Proficiencies <ul><li>Dutch: fluent (operational requirement).</li><li>English: able to read and understand technical documentation.</li></ul> Location <ul><li>Olen – 100% onsite presence is required</li></ul> Contract <ul><li>Contract with as objective an internalization on the payroll of client</li><li>Start: ASAP, but a notice period is not a problem</li></ul>

Electrical Technician

HVDC Package Manager Location: Swindon/London/Coventry/Site Duration: 30/03/2026 to 30/04/2027 Project: Norfolk Rotation: Mon–Fri, 40 hours per week Outside IR35 Description The HVDC Package Manager is responsible for the delivery of the HVDC contract and coordination of all packages forming the HVDC transmission system, including the Onshore Substation, Offshore Substation and the 400kV grid connection. The role operates with full autonomy under a Statement of Work (SoW), providing expert consultancy, technical leadership and contract oversight for the client’s offshore wind project. Key Responsibilities • Act as an independent specialist consultant delivering the HVDC package scope under a Statement of Work (SoW). • Provide expert guidance during development, negotiation and execution of HVDC-related contracts. • Act as Client Representative under the HVDC works contract. • Produce and maintain the HVDC package execution plan including schedule, budget forecasts and risk/opportunity assessments. • Develop and deliver the commercial strategy for the HVDC package in collaboration with the Contracts Manager. • Coordinate technical inputs, engineering assessments and specialist analyses to support decision-making. • Review contractor proposals, schedules and methodologies, providing independent technical and commercial recommendations. • Coordinate with external stakeholders including contractors, MWS, regulatory bodies and certification entities. • Prepare interface plans, action logs and progress reporting in line with SoW requirements. • Provide specialised HSE advisory for HVDC construction activities. • Review contractor HSE documentation and ensure alignment with relevant industry standards. • Prepare reports, dashboards and presentations for the project leadership team summarising progress, risks and key decisions. • Provide independent expert input at project meetings as required. Key Qualifications • All mandatory offshore certificates. • Degree or Chartership in Project Management with APM membership or equivalent. • Degree in Electrical Engineering or similar technical discipline. • Knowledge of standards related to Offshore Substations and offshore electrical systems. • Experience delivering complex HVDC electrical systems. Must-Have Experience • Degree-level education or similar technical qualification. • Working knowledge of Electrical Engineering or closely related technical discipline. • Experience delivering major capital projects through development and construction stages. • Experience with HV and EHV transmission systems. • Knowledge of grid infrastructure and regulatory requirements. • Strong influencing and negotiation skills with contractors and grid operators. • High competence in contract management, claims management, negotiation and dispute resolution. • Self-starting, motivated team player with strong communication skills. • Flexibility to travel frequently within the UK and internationally.

HVDC Package Manager

Electrical Project Manager Location: Swindon/London/Coventry/Site Duration: 01/04/2026 to 02/03/2027 Project: Awel y Mor Rotation: Mon–Fri, 40 hours per week Outside IR35 Description Overall responsibility for all project activities necessary to deliver the electrical transmission system of the offshore wind project, in accordance with established Health, Safety and Environment (HSE), quality, schedule and cost targets. Key Responsibilities • Delivery of the Electrical Transmission system for the offshore project. • Prioritise HSE performance through planning, design and implementation to eliminate or reduce risks during design, construction, operation and maintenance. • Provide key inputs into the development of the wider electrical system including grid connection, onshore and offshore substations and cables. • Work with package managers to ensure coordinated delivery of associated packages on time, in quality, on budget. • Cost, schedule, quality and change control. • Technical, commercial, cost, resource and time planning for the electrical system and associated works. • Support permitting, land and development activities. • Coordinate and align procurement planning and supply chain engagement. • Promote ‘Right First Time’ behaviours within the project team. • Collaborate with major construction packages such as WTGs and Inter-Array cabling. • Contribute to Lessons Learned activities. • Report to the Project Leadership Team as required. • Represent the electrical system packages at Contractor Steering Committee meetings. • Understand OFTO transaction processes, risks and opportunities for UK projects. Deliverables Safe delivery of the electrical transmission system including development, construction and handover to operations, closeout of commercial aspects and full as-built documentation. Key Qualifications • All certificates required to perform offshore works. • Degree or Chartership in Project Management and membership of APM or equivalent. • Sound knowledge of Electrical Engineering or related discipline. • Knowledge of standards for Offshore Substation and offshore works. Must-Have Experience • Degree level education or equivalent. • Working knowledge of Electrical Engineering or technical equivalent. • Experience delivering large, complex capital projects through development and construction. • Experience of HV and EHV transmission systems. • Knowledge of grid infrastructure. • Strong influencing and negotiation skills with suppliers and grid operators. • Strong team player, self-starter and highly motivated. • Business proficient in English. • Competent in contract management, claims, negotiation and dispute resolution. • Strong interpersonal communication skills. • Flexible approach and willingness to travel frequently.

Electrical Project Manager

Project Manager Till end of the year - potential to go permanent after Olen, Belgium This client is a global player in material technology. A stable international group and at the same time a top Belgian company with four locations in our country. We develop technologies and produce materials for high-performance solar cells used in satellites, rechargeable batteries, LED applications, catalysts… Through recycling, we recover valuable metals from, among other things, laptops and mobile phones. Business Unit Description The Cobalt & Specialty Materials (CSM) business unit of the client, oversees the entire value chain of cobalt and nickel, from procurement to production, distribution, and recycling. It develops high-quality materials for applications such as batteries, catalysts, and industrial components. CSM places a strong emphasis on innovation, process optimisation, and sustainable material technology. The business unit works closely with engineering and project teams to develop new solutions and to continuously improve. Many activities take place at the site in Olen, where technical expertise is central. Primary Tasks & Responsibilities Within the Project Engineering department, you will set up and lead technical industrial projects, from idea to realization. These projects are carried out for production facilities, infrastructure, and R&D. We have different type of projects within different disciplines. Some projects are in the start-up phase, some projects are already ongoing. You are ultimately responsible for all aspects of your project: <ul><li>Responsible for defining the project scope. In consultation with the client:</li><li>Defining specific deliverables: what is complete when the project is finished?</li><li>Defining constraints (budget, planning).</li><li>Responsible for assembling and leading the project team.</li><li>Responsible for the technical design of the entire project.</li><li>Responsible for preparing specifications / tender documents for orders, engineering firms, and contractors (both internal and external).</li><li>Responsible for the selection of orders, engineering firms, and contractors. Also consider specific resources, e.g., designers, but also outsourcing (part) projects.</li><li>Directing and monitoring all resources, both internal and external.</li><li>Maintaining contact with the client throughout the project to capture and assess changes. If agreed upon, implementing them in the project (scope changes).</li><li>Reporting to stakeholders.</li></ul> Technical Profile Requirements <ul><li>You have 3-5 yrs experience managing End-2-End projects with full responsibility (from pre-study till execution and delivery) as project manager.</li><li>You completed at least 5 relevant projects (100K-2500K) as project manager.</li><li>Good Knowledge and experience of all common project management aspects.</li><li>Experience with MS project or equivalent planning software</li><li>You have a technical background as (project) Engineer</li><li>You have a broad general knowledge of the different disciplines: Mechanics, elektricity, piping, Civil,…</li><li>You have knowledge and/or experience in the process industry</li><li>Academic thinking level (analytical but also helicopter view).</li><li>Technical knowledge such as electromechanics, chemistry.</li><li>Good reporting skills.</li></ul> Non-Technical Profile Requirements <ul><li>Team player, communicative at all levels (clients, colleagues, suppliers, higher management…).</li><li>You can manage and coach a team.</li><li>You are able to challenge your project team-members in the proposed solutions</li><li>You ask ‘the right’ questions at all times</li><li>You have broad experience and great interest in technology, engineering, and project management.</li></ul> Language Proficiencies <ul><li>Dutch: fluent</li><li>English: Very Good</li></ul> Location <ul><li>100% onsite at Olen</li><li>Occasional travel abroad can be requested</li></ul> Certifications <ul><li>VCA-VOL</li></ul> Interviews <ul><li>First interview via teams (30-60min) (week of 25/3 maximum)</li><li>Second interview onsite, incl. site tour and case study (1,5-2,5hrs) (week of 30/3 maximum)</li></ul>

Project Manager

Crew Coordinator Cables – Senior 13/04/2026 – 30/11/2026 Cherbourg – Offshore 4/2 rotation Department Description and Responsibilities As a Crewing Coordinator – Cables, you will play a key role in supporting our offshore cable project teams. You ensure that all crew members meet client-specific certification requirements, manage logistical arrangements, and provide essential administrative support. You also coordinate local arrangements in France for personnel working on international cable projects. Certification & Compliance <ul><li>Update and maintain all personnel certificates in line with client and project requirements.</li><li>Ensure timely renewals of mandatory offshore and technical certificates.</li><li>Maintain accurate and complete crew compliance records.</li></ul> Travel & Logistics <ul><li>Organize travel arrangements for project personnel, including flights, accommodation, and transportation.</li><li>Prepare and manage travel itineraries and ensure all arrangements align with project schedules.</li></ul> Administrative Support <ul><li>Provide daily administrative support to the project team.</li><li>Assist with documentation, reporting, and internal communication related to crew management.</li><li>Maintain up-to-date records in internal systems.</li></ul> French Local Arrangements <ul><li>Coordinate French local logistics (accommodation, transportation, local registrations, etc.) for project staff.</li><li>Liaise with local French partners, suppliers, and authorities when necessary.</li></ul> Profile Requirements <ul><li>Relevant experience in crewing coordination, logistics, or personnel administration (preferably within offshore or technical project environments).</li><li>Strong organizational skills and attention to detail.</li><li>Ability to work effectively in a fast-paced, project-driven environment.</li></ul> Language proficiencies <ul><li>Excellent command of the English language (written and spoken). French language skills are a strong advantage.</li></ul>

Crew Coordinator

MARINE COORDINATOR Offshore Wind Farm Operations & Maintenance Contract Start: June 15, 2026 Contract End: September 4, 2026 Duration: Approximately 12 weeks Work Location: O&M Base Fécamp, France Working Language: French (Required) Rotation Pattern: No rotation - Continuous presence required WORK SCHEDULE Subject to change depending on operational progress: <ul><li>Morning Shift: 07:00 – 14:00</li><li>Afternoon Shift: 13:00 – 20:00</li><li>Weekend Shift: 12 hours/day (as scheduled)</li><li>Weekend Work: 1 out of 3 weekends</li></ul> POSITION OVERVIEW The Marine Coordinator ensures the safety of offshore activities, controls and secures access to the offshore site and associated ports (primarily the maintenance base) by ship. The role involves active participation in activity planning and operational optimization while maintaining 24/7 maritime coordination coverage. KEY RESPONSIBILITIES 1. Leadership & Coordination <ul><li>Lead daily coordination meetings (internal and external)</li><li>Ensure activity reporting to Production Manager and Site Manager</li><li>Coordinate internal and external feedback sessions</li><li>Ensure implementation of actions to optimize offshore and port operations</li></ul>2. Risk Assessment & HSE Compliance <ul><li>Participate in risk assessment and analysis of offshore and port activities</li><li>Propose safety recommendations</li><li>Ensure HSE rules are respected in conjunction with Site Manager and HSE Manager</li><li>Verify staff authorizations and communicate safety instructions to all parties</li></ul>3. Operational Planning <ul><li>Participate in operations planning with production and site managers</li><li>Contribute to short and medium-term schedule development</li><li>Manage daily coordination meetings and issue access permissions while managing priorities</li><li>Establish and maintain contact with maritime authorities (Port, CROSS)</li></ul>4. Activity Tracking & Surveillance <ul><li>Monitor personnel movements (working at sea and wind farm entry)</li><li>Track transport means and on-site receptions</li><li>Coordinate visitor access for exceptional exemptions</li><li>Ensure continuous site surveillance and monitoring of all vessels, barges, floating structures, and aircraft passing through or near the site</li><li>Coordinate vessel positioning to minimize downtime, avoid conflicts of interest, and maximize safety</li><li>Make appropriate arrangements for third-party vessels</li></ul>5. Maritime Operations <ul><li>Track equipment to and from offshore site</li><li>Ensure safe handover at end of watch for 24/7 continuity</li><li>Supervise safe and timely embarkation/disembarkation of CTVs (Crew Transfer Vessels)</li><li>Oversee safe loading and unloading of equipment</li><li>Track hazardous products used in park operations</li><li>Inform vessels about exclusion zones, access restrictions, diving operations, and heavy maintenance operations</li></ul>6. Weather Monitoring & Safety <ul><li>Monitor on-site weather evolution</li><li>Immediately inform ships of weather deterioration</li><li>Coordinate team repatriation when necessary for safety</li><li>Share safety alerts and safety-relevant information (particularly to fishermen and boaters)</li><li>Maintain good relationships with other sea users</li></ul>7. Asset Protection & Monitoring <ul><li>Signal and record position of subsea equipment or abandoned/overboard equipment</li><li>Monitor asset functioning and trigger interventions via Operational Center (OCC) to restore production</li><li>In case of intrusion on assets, ensure doubt removal via video surveillance and notify authorities</li></ul>8. Crisis & Incident Management <ul><li>Ensure monitoring and reporting of emergency exercises</li><li>Ensure Emergency Response Plan implementation</li><li>Collect, centralize, and disseminate information during potential or actual crises (handrail)</li><li>Assist HSE Manager in incident analysis (near misses, first aid situations, or situations of greater severity)</li></ul> STAKEHOLDER MANAGEMENT Internal: <ul><li>EMR Management (O&M Base Team)</li><li>O&M Core Teams of other French offshore farms</li><li>Industry Department (Performance and Engineering)</li><li>Operational Center (OCC)</li></ul>External: <ul><li>Subcontractors for maintenance of offshore wind substation, wind turbines, foundations, and inter-wind turbine cables</li><li>Crew Transfer Vessel (CTV) Crews</li><li>RTE (Réseau de Transport d'Électricité)</li><li>CROSS (Regional Operational Surveillance and Rescue Center)</li><li>Fishermen and boaters</li><li>Maritime Prefecture</li><li>SNSM (National Sea Rescue Society)</li><li>Gendarmerie Maritime</li><li>Harbour Master's Offices</li></ul> MANDATORY REQUIREMENTS <ul><li>Valid Passport (minimum 1 year validity)</li><li>Right to work in France</li><li>Proficiency in French (working language)</li><li>PPE as per defined HSE requirements (provided by contractor)</li></ul> Offshore Wind Farm Operations • Fécamp Site • Marine Coordination Department

Marine Coordinator

WTG Installation Client Representative Offshore Germany - Nordsee Cluster A 23/05/2026 – 31/12/2026                 SCOPE OF WORKS The WTG Installation VESSEL REPRESENTATIVE shall be based aboard the NORSE WIND Installation Vessel, feeding back to the RWE LOG and WTG Package, and shall act as RWE’s primary point of contact for all activities undertaken from aboard the WTG installation vessel.   DELIVERABLES <ul><li>Represent the RWE WTG package on the installation vessel and act as the main point of contact for all RWE activities and requests, involving in particular the supervision and coordination of vessel operations, turbine installation works and RWE crew change logistics.</li><li>The representative shall witness operational activities where safe to do so, observe the Contractor’s performance, and represent the WTG package team in matters of HSE, quality, Contractors' procedures, and programme.</li><li>Attend regular meetings and conference calls on behalf of the WTG package when required.</li><li>Provide regular reporting towards the RWE WTG package team</li><li>Document and agree (with the representatives of the WTG OEM contractor and the Installation Vessel) the progress of the works on a daily basis in the form of a Daily Progress Report (DPR). The DPR shall be recorded into a system provided by the Employer.</li><li>Prompt identification and notification of any construction issue that may arise or have the potential to arise during the works and contributing in resolving any issues where applicable.</li><li>Perform inspections and record findings in RWE’s quality tracking system.</li><li>Management of safety through participation in safety on behalf of RWE. This should include identification and reporting any safety-related observations on a day to day basis as well as performing primary duties and raising alerts to any perceived trends relating to HSE risks as they arise.</li><li>In the event of an incident / accident, following the Emergency response plan and provision of information to support investigation(s) and insurance claims. NOTE – The Sub-Contractor will almost always lead on investigations, but it is helpful for RWE project management to have its own information available.</li></ul>  CERTIFICATIONS <ul><li>GWO BST Training:<ul><li>Sea Survival,</li><li>Working at heights,</li><li>First Aid,</li><li>Fire Awareness,</li><li>Manual Handling.</li></ul></li><li>Helicopter Under Water Escape Training (HUET) with Compressed Air Emergency Breathing System (CA-EBS) certification.</li><li>Current valid Offshore Energies Medical Certificate= accompanied by an additional fitness assessment such as the "Chester Step Test".</li><li>IOSH Managing Safely or similar HSE training.</li></ul>  OTHER REQUIREMENTS <ul><li>Experience of providing offshore rep services in offshore renewables (preferably under an EPCI with separate vessel Contract environment). Proven experience as offshore representative for WTG installation on windfarms is essential.</li><li>Understanding of marine operations (particularly jack-up vessels) and marine coordination procedures</li><li>Experience in interface with Marine Warranty Surveyors (MWS)</li><li>Experience with WTG post installation completion / commissioning activities and handover procedures is preferable</li><li>A strong working knowledge and understanding of Health and Safety requirements;</li><li>Strong understanding of best wind industry practice, applicable codes, standards relevant to offshore construction.</li><li>IT proficient (Spinergie, Microsoft Word, Excel and Internet), experience using inspection/auditing software in a construction environment desirable.</li><li>Excellent communication skills, able to communicate effectively with others (shall be fluent in spoken and written English)</li></ul>

WTG Installation Client Representative

Project Planner - NB/AYM/DBS Projects Type: Outside IR35 Duration: 26/03/2026 – 01/03/2027 (NB Project) 03/2026 - 01/27 for AYM and DBS Project Work location will be in the client office - Dashwood house 69 Old Broad St. London. (Couple of times a week in the office) Overview role: • Produce project schedules for the Norfolk Boreas Project within client P6 Environment • Act as first point of contact for all project schedule topics on Norfolk Boreas • Management of project baseline • Monthly project schedule reporting • Production of S-curves to outline progress across all packages of work • To conduct scenario planning, what-if analysis, schedule risk analysis • Ensure a robust, critical path driven project schedule is available to the project(s) • Monthly review of contractor schedules for associated packages Key Responsibilities: • To lead the delivery of project planning services on the Norfolk Boreas project in the UK, supporting the project through CFD Bid, FID, Design, Manufacturing and Construction • Once the project secures a CFD the role will need to lead and ensure appropriate allocation of work within the project planning team for Norfolk Boreas, working with the UK&I Regional Lead • To Lead on all Project Schedule and Project Planning topics for the project and ensure the schedule is optimised and efficient for a competitive CFD bid • To ensure that all Project Planning activities are delivered according client processes and procedures • To engage with external suppliers on all Project Schedule and Project Planning topics Must Have Qualification/Experience: • Detailed knowledge of Offshore Wind Development & Construction • Detailed knowledge of Primavera P6 • Experience of leading Project Planners on major Civil or Offshore Construction Projects through Design, Manufacture and Construction • Experience of Schedule Risk Analysis • Experience of Reporting and providing information to Board Level, Project Director and Senior Project Managers

Project Planner UK

Annual Service Technician Project Name: Annual Service BKR02 2026 Duration: 03-Jun-2026 - 09-Sep-2026 Business Unit: Operations Job Classification: Operations Location: Emden, Germany Type: AUG Contract Description: The Consultant must bring his/her own PC and/or iPhone. External consultants’ equipment such as PCs, mobile phones and iPads must always be up to date with the latest iOS release. The owner must allow clients Air Watch security and management software for iPhones and iPads to be installed. The app is mandatory on all mobile devices used by clients staff (including External consultants) to protect them from cybercrime. The owner must grant approval for clients to remove apps, data and access from privately owned equipment if it is deemed to pose a risk in relation to clients security or the GDPR regulations, if the equipment is lost/stolen, or if the owner ceases to have an active contract with Magnet and/or the client. When an external consultant leaves this client, they must contact the IT Service Desk to remove all client apps and data. The IT Service Desk can only support privately owned equipment in connection with client Air Watch security and management software. Requirements: Please note that the target rate is just an estimate and that each Supplier is expected to comply with the rates included in the signed Frame Agreement, which constitute max rate. Extension AUG confirming list of consultant names BKR02 consists of 56 Turbines, V164, 8.0 MW. The operation takes place on board our Service Operation Vessel (SOV), Port call harbor in Emden. Standard PPE is to be brought by the consultant (Life-Vest with PLB, Survival Suit, Safety Boots S3 (ankle high), high-vis workwear, helmet, harness/lanyards, Avanti Glider AL04. A complete list of PPE requirements can be provided if required. Minimum Competency Requirements: Competent Technician: GWO- Working at heights (only valid for 12 months in Germany!) Advanced Rescue Training Enhanced first aid Sea Survival Manual handling Fire Awareness BTT Medical fitness certificate incl. Chester step test Generic crane user training Avanti Lift User Training EUP WTSR Core Course

Service Technician Germany

Senior Technician Location: Vlissingen, Netherlands Duration: 02/03/2026 to 31/12/2026 Type: On site – Freelance Rotation: Mon-Fri, 8 hrs/day Description: Client information This client is a world leader in the highly specialised fields of dredging, solutions for the offshore energy market, infra marine and environmental works. With more than 140 years of experience and 5,200 highly skilled professionals, we bring tailor-made solutions, innovation and new technologies to our customers’ projects, ensuring that they are performed safely, efficiently and cost-effectively. Due to our sustained investment effort, we operate one of the largest and most modern, versatile and purpose-built fleets in the world. As a ME technician you will work in a challenging environment in which you are dealing with heavy equipment, complex installations and project deadlines. Your main location will be at our offices at our client Base Vlissingen (DBV), the Netherlands. Primary Tasks and responsibilities <ul><li>Perform preventive and corrective maintenance on Mission Equipment (ME) between projects.</li><li>Diagnose technical issues and carry out necessary repairs to ensure optimal equipment readiness.</li><li>Supervise subcontractors performing maintenance or repair activities on mission equipment or tools.</li><li>Prepare mission equipment and technical tools for upcoming offshore projects, including testing and verification.</li><li>Support mobilisation and demobilisation of equipment on vessels.</li><li>Ensure all ME complies with safety, technical and operational standards.</li><li>Maintain accurate documentation of maintenance activities, inspections and service reports.</li></ul> Secondary Tasks and responsibilities <ul><li>Assist with inventory control of tools, spare parts and ME components.</li><li>Coordinate procurement needs (spare parts, consumables, external services).</li><li>Ensure proper storage, labelling and organisation of mission equipment and tools.</li><li>Provide operational support to the ME Engineer and vessel teams when required.</li><li>Contribute to improvements in maintenance procedures, planning and workflows.</li><li>Support internal audits, safety inspections and compliance requirements.</li></ul> Technical profile requirements <ul><li>Strong hands-on experience with mechanical, hydraulic and/or electrical systems.</li><li>Ability to read and interpret technical drawings, manuals and maintenance procedures.</li><li>Experience with heavy equipment or complex maritime/offshore installations is a strong advantage.</li><li>Knowledge of preventive maintenance systems and asset management tools.</li><li>Ability to troubleshoot and diagnose equipment malfunctions independently.</li><li>Safety‑focused mindset and familiarity with maritime/offshore safety standards (LOTO, lifting, rigging, etc.).</li></ul> Non-Technical profile requirements <ul><li>Accurate, structured and detail‑oriented way of working.</li><li>Strong sense of responsibility and ownership over equipment readiness.</li><li>Team player with clear and open communication skills.</li><li>Ability to supervise external technicians/subcontractors in a professional manner.</li><li>Able to work under pressure and meet project deadlines.</li><li>Comfortable working in a dynamic environment with heavy equipment and challenging planning cycles.</li></ul> Methodology/Certification requirements <ul><li>Technical diploma or degree in Mechanics, Electromechanics, Marine Engineering or similar field.</li></ul> Certifications required <ul><li>Valid documentation to work in Flushing (Vlissingen)</li></ul> Language proficiencies <ul><li>Fluent in Dutch & English (spoken and written)</li></ul>

Senior Technician

Client Representative – HDD Cable Projects Department: Project Delivery / Construction Oversight Reports To: Project Manager / Construction Manager Location: On-site (Field-based, Fully Onshore) Employment Type: Full-time / Contract Rotation: 4 on 4 off (2 representatives per rotation for 24-hour coverage) Project Timeline Project 1: April start (4 representatives required) Project 2: June start (4 representatives required) Duration: 4 – 6 months About the Role The Client Representative serves as the on-site delegated authority for the client, ensuring Horizontal Directional Drilling (HDD) cable installation activities are executed safely, to specification, on schedule, and in full compliance with contractual, environmental, and regulatory requirements. This is an oversight and assurance role focused on coordination, verification, and quality leadership—not hands-on operation. Key Responsibilities Technical Oversight & Quality Assurance <ul><li>Monitor HDD operations including pilot hole drilling, steering, reaming, and pullback activities</li><li>Validate bore path design, allowable bend radii, and geotechnical suitability</li><li>Review and approve method statements, execution plans, and risk assessments</li><li>Oversee cable pull calculations, tensile limits, and sidewall pressure compliance</li><li>Ensure proper duct installation, conduit integrity checks, swabbing, mandrel testing, and proofing</li><li>Interface between HDD works and electrical cable installation teams</li></ul>HSE Leadership & Compliance <ul><li>Enforce client HSE expectations and foster a strong site safety culture</li><li>Manage permit-to-work systems, site inductions, toolbox talks, and Safe Job Analysis (SJA)</li><li>Identify hazards specific to HDD: high pull operations, drilling fluid management, pipe handling, confined space, and pressure systems</li><li>Oversee environmental controls: drilling fluid containment, spill response, waste management, and watercourse protection</li><li>Manage Inadvertent Fluid Release (IFR/frac-out) incidents and mitigation strategies</li><li>Ensure compliance with land access permits, environmental regulations, and utility guidelines</li></ul>Project & Contract Management <ul><li>Monitor contractor performance against method statements, risk assessments, and daily progress plans</li><li>Track critical path activities and schedule adherence</li><li>Identify deviations from specification and authority to escalate or stop work when required</li><li>Produce daily reports on meterage drilled, drilling parameters, issues, risks, incidents, and equipment downtime</li></ul>Stakeholder Management <ul><li>Serve as primary on-site liaison between client, contractor, landowners, environmental regulators, and cable installation teams</li><li>Translate complex technical issues for non-technical audiences</li><li>Resolve conflicts between contractor crews and client expectations professionally and effectively</li></ul> Required Competencies HDD Technical Knowledge: Pilot hole drilling, steering, reaming, pullback; drilling fluids and recycling systems; bore tracking systems (Walkover, Gyro, Wireline); HDD failure modes (lost circulation, frac-outs, stuck pipe, over-pull) Geotechnical Understanding: Interpret geotechnical reports, soil logs, ground conditions, rock strength; survey data and as-built requirements Quality Assurance: Pre/post-reaming logs, drilling fluid logs, pullback records, alignment reports; standards compliance (UKSTT, EN 16228, DCA, API RP 13, ASTM F1962, NASTT) Safety & Environment: HSE certification, hazard recognition, spill response, IFR management Project Management: Contractor oversight, progress monitoring, schedule awareness, technical documentation review Qualifications & Experience Education <ul><li>Degree or diploma in Engineering, Construction, Telecommunications, or related technical field</li></ul>Certifications (Required/Preferred) <ul><li>IOSH Managing Safely or NEBOSH General Certificate (or equivalent HSE certification)</li><li>NASTT HDD Good Practices or industry-recognized HDD training</li><li>Confined Space certification (site-dependent)</li><li>Lifting Operations certification (site-dependent)</li><li>First Aid certification (site-dependent)</li></ul>Experience <ul><li>3–5 years in HDD operations, trenchless construction oversight, or cable installation projects</li><li>Minimum 1–2 successful HDD cable projects completed in a supervisory or client representative role</li></ul> Personal Attributes Integrity: Objective representation of client interests with unwavering ethical standards Assertiveness: Ability to enforce requirements professionally without unnecessary escalation Attention to Detail: Rigorous review of critical parameters and documentation Decision Making: Sound judgment with clear technical justification Adaptability: Resilience in challenging field conditions Proactivity: Forward-thinking risk identification and mitigation Working Conditions <ul><li>Physical Requirements: Ability to conduct site walks, work in varying weather conditions, and wear required PPE</li><li>Schedule: 4 on 4 off rotation with 24-hour coverage provided by 2 representatives per rotation; project-driven schedule that may include extended hours or shift work to meet construction timelines</li></ul>

Client Representative - Cable/Drilling

Lead Project Manager Start date: April End date: 1st October Position: As a Project Lead, you will be responsible to lead Special Projects designated within the Service Operations area. Special Projects and TM are considered Blade Inspections/Repairs Campaigns, Retrofits Campaigns, or even Large Components Repairs campaigns. Responsibilities: <ul><li>Assists in the project execution of special projects within the Services department</li><li>Maintain Project Schedule(s).</li><li>Schedules necessary Inspection campaigns and process the findings.</li><li>Assists in the coordination of blade/large components repair campaigns based on findings.</li><li>Complies with a defined schedule.</li><li>Performs quality control audits.</li><li>Assists in the management of project costs including monitoring and validating contractor timesheets.</li><li>Assists in the coordination and supervision of manpower and resources on-site for project activities.</li><li>Communicates project status to Management to facilitate customer communications.</li><li>Generates and present periodic reports to the Management team.</li><li>Coordinates and implements technical solutions (retrofits) in cooperation with the Engineering and Technical Services departments.</li><li>Follows standard client Project Management processes.</li><li>Performs pertinent operational and departmental tasks as required</li><li>Performs other duties as assigned by Supervisor</li></ul> Requirements: <ol><li>Competencies/Qualifications (Knowledge, Skills, and Abilities):</li></ol><ul><li>Proven relevant experience managing, leading, and/or coordinating several activities/projects at once (preferably within the Wind Industry or similar industry)</li><li>Ability to plan, organize and execute projects, meet deadlines, prepare reports</li><li>Experience with the coordination of resources including subcontractors (Internationally and domestically)</li><li>Excellent written and verbal communication skills</li><li>Excellent organizational skills including attention to detail and multitasking</li><li>Strong interpersonal skills, and professionalism</li></ul> Education: <ul><li>High School diploma or equivalent required.</li><li>Bachelor’s Degree in technical or engineering field preferred but will consider relevant work experience instead of a degree</li><li>PMP certification desirable</li></ul> Experience: <ul><li>Minimum of 2-3 years in project management, project lead, or other management capacities, especially within the renewable energy or construction industry preferred</li></ul> Other Condition: <ul><li>Travel to project sites as required (>75% travel)</li><li>Driving is an essential function of the job. Must possess a full valid driver’s license and be insurable under our auto insurance policy. This position will be subject to periodic driver’s abstract checks to confirm continued insurability.</li><li>Must be able to pass a pre-employment physical administered by a medical examiner to ensure the ability to safely perform job functions and meet the physical demands of the position</li><li>Ability to meet specific OSHA and ANSI weight limits of 265 lbs. or less.</li><li>Flexible to work long hours and adapt to changing schedules as needed for project demands.</li><li>Ability to travel domestically and internationally up to 100%, including extended stays and variable work schedules to meet business needs.</li><li>Must be legally authorized to work in the U.S. without current or future employer sponsorship</li><li>Ability to obtain a U.S. Passport and Canadian work authorization required</li></ul> .

Lead Project Manager

Daniel joins our Renewable Energy team as a Delivery Consultant.

Daniel Bentley